Check out the neat work on this Geberit Mapress job the CG Systems team carried out in Cambridge; this installation feeds a Heat Recovery System providing hot water for the on site kitchens:
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
On a site in Epsom where CG Systems maintains all the gas fired plant equipment, our client is currently changing over from a steam system to a LTHW (Low Temperature Hot Water) district system. As part of the process the team has installed a temporary backup boiler (one of the largest we’ve seen) while the works are ongoing. Have a look…
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
With all pipework installed, tested, purged and commissioned, here’s a gas run in 76mm Stainless Steel Xpress that serves a new Lennox Benelux BV AHUAll…
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
Previously an office block that has been stripped back completely to be converted to a number of residential dwellings, the team at CG Systems spent a week onsite in Watford fixing the communal heating and cold water main. Check it out…
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
The team at CG Systems carried out an 80 meter gas run for a national Supermarket chain in order to feed temporary boilers serving the building whilst works are carried out to the existing plant on site. Have a look at the final product: installed, tested, purged and ready for use …
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
Working onsite in Victoria for a national retailer, the team at CG Systems was responsible for piping three floors of Fan Coils, which we achieved by forming a supplementary plant room on the top floor to provide hydraulic separation from the existing landlord’s supply on the Heating and Chilled systems.
This was certainly one of the more challenging products (with regard to time pressure) we’ve completed but our Engineers have moved along at a phenomenal pace and kept within the allocated schedule, even finishing early on one of the floors. Have a look at the results…
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
The Plantroom that the CG Systems team has been working on in the BBC’s former home at White City has now been completed and commissioned. This serves a three-screen cinema, bar area, multiple toilet blocks and a back-of-house area.
Have a look at the final product…
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
Have a look at these temporary Chillers and Air Handling Units, which we installed for a client in Bexhill on the same day as we received the call out. The team was onsite within a couple of hours and able to get everything up and running by the close of play; a critical time pressure as the units hold products of a temperature sensitive nature, the safety of which is ensured through a carefully maintained warehouse environment.
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
One of the perks of working on building services is that we get to revel in the architectural prowess of some pretty epic designs, such as the award winning superstructure (featured below) in which we carried out ductwork, air conditioning and small plumbing works during a CAT B fit out on the thirteenth floor.
The White Collar Factory is an energetic and diverse business hub that is home to some of the world’s foremost companies.
On this particular job, the decision was made to keep all of the building services on show. This format of installation works well for us a business as it allows us to showcase our work.
All the installed AC plant and kit was Daikin; the VRV was fitted on the roof in the plant space on the inside of the running track (that is on the roof) and the controls on the internal units were all run through an iTouch manager.
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.
Following on from the enabling and installation work successfully carried out at the Royal Chelsea Hospital, the team at CG Systems proceeded to tackle the final part of the project: below ground gas pipework.
There were a number of irrigation pipes that crossed the tech and made the installation of a 125mm PE pipe quite awkward. To make it work, we had to squeeze off the existing below ground gas pipework on both sides of the site, which was followed by a tightness test on the entire gas carcass. The sheer size of the gas system as well as a lack of valves on location meant that we had to cut into the pipework. (See the below images for how it went down…)
Ultimately, the work was a success. The 200meters of pipe and multiple fittings we used on the job was supplied by Smith Brothers Stores, and went together without a hitch, making for a tidy installation.
Overall the client is very pleased with the work, as are we.
If you’d like further information on our involvement in this project, feel free to contact the CG Systems team on info@cgsystems.cc.